Venetian plaster do it yourself. Venetian plaster: price
Do you want to feel like a Venetian doge living in a magnificent palace of ancient Rome? Try to make your home in the Venetian style. Decorating the walls of your home with a unique finishing material, you can give it the entourage of antiquity and sophistication. DIY Venetian plaster is a good solution for an original repair with a modest budget.
Characteristics of the material
Venetian plaster in the interior first appeared in the ancient Roman era to decorate the palaces of the Doge and wealthy citizens. A distinctive feature of Venice is that the streets there often replace canals, so the requirements for not only aesthetics but also for durability and water resistance were imposed on the wall decoration.
Venetian craftsmen usually used marble chips and flour in the coating. The walls of the palaces were trimmed with exquisite plaster; it was used as a basis for the subsequent application of beautiful frescoes.Most often, the finish was done in white and light shades. If necessary, add color to the composition was added natural dyes.
Now Venetian plaster remains at the top of popularity in the interior of modern premises. Externally, the walls look like they are made of natural stone with its structure and divorces, well refract light, create a sense of reliability and restrained luxury.
Main properties of the Venetian coating
High strength makes it possible to exploit Venetian plaster for about 20 years. The walls are natural, resistant to high humidity, they are excellent in washing, they are not afraid of soap, therefore such finishing can be carried out in rooms of any purpose, including bathrooms and kitchen. The only requirement for care is not to use abrasives.
Thanks to modern production technologies, a wide variety of textures and colors can be found that satisfy even the most demanding taste.
The only drawback that Venetian plaster has is the price, which is high not only because of the cost of the chosen material, but also the work of specialists.
The composition of the Venetian coating
Decorative plaster Venetian includes a crumb from natural marble, granite and quartz sand. It differs from the composition used in ancient Rome only in that now, instead of hydrated lime, synthetic additives are included as binding components. Venetian plaster is produced from natural marble chips, dyes, water emulsion and acrylic additives, the application of which will help to recreate the real ancient Roman color in private and public spaces. And many use it.
Venetian plaster do it yourself: stages of implementation
To save on finishing work, you can independently, at home to make the composition for Venetian plaster.
When buying a finished mixture, you must first determine its quantity, which is calculated by the area of the walls. Then you need to choose the texture of the future material, color and desired shade.
The cost of ready mixes depends on the manufacturer, composition and quality of materials. Today, shops offer plasters from famous brands "Marmorino", "Rococo", "Meridional", "Stukko Metallico" at prices ranging from 750 to 2400 rubles. per square meter.
Purchased in the store mixture is diluted with water at room temperature in the percentage indicated on the package, and stirred using a drill with a mixing nozzle. At the next stage, the dye is gradually added.
Venetian plaster can be applied directly to concrete, brick or stone walls. If they were previously covered with paint, whitewash or wallpaper, all this must be washed or cleaned.
Before coating, the surface is leveled and coated with a deep-acting soil compound.
To prevent the development of mold fungi, it is necessary to thoroughly sand the walls after drying, which usually lasts 6-12 hours. After the surface is completely dry, it is again subjected to priming, this time already covering the composition. At this stage, the dye of the selected shade is added to the mixture.
Venetian plaster: applied to walls
The main principle of such finishing is the application of plaster in several stages with a gradual change in the thickness of the coating layer, which allows to imitate the texture of the stone. The room must be clean and dry so that dust does not come to the surface. Close the windows and turn off the air conditioners to prevent drafts.
The first layer of plaster using a small spatula and a grater is randomly applied to the wall with short strokes of different lengths. After that, the surface is leveled, the mixture flows are eliminated. Grater should move at an angle of 25 degrees to the wall.
Then grater must be cleaned from the remnants of the material and wash. The wall dries 15 minutes. Then with a spatula of a larger size, the plaster layer is smoothed in the top-down direction from top to bottom.
The resulting gloss is fixed with a cleaned grater at an angle of 10 degrees to the wall.
When processing the bottom of the surfaces, as well as in the corners, at the doors and windows, the application of plaster starts from their line to the center of the wall with cross movements.
Applying wax to fix
To ensure the strength and visual depth of the plaster is covered with wax, which is liquid and thick. Silver or gold powder can be added to the transparent wax to create a metallic luster.
For applying liquid wax, use a soft cloth or a piece of flannel, for thicker it is recommended to use a spatula. After coating the wall, the solution is rubbed with a soft cloth to provide even more shine.
Thanks to the exquisite noble colors and textures, any interior can be decorated with Venetian plaster, the price of which in the case of making with your own hands will turn out to be quite reasonable. At the same time, you can easily embody a variety of decorating ideas.
Principles of combination in the Venetian interior
You can use the principle of combining, decorating only one wall with this finish. You can apply different textures and colors in decorating the top and bottom of the walls. Effectively look niche, decorated in contrasting colors.
Venetian plaster can be used in the design of the entire premises or parts thereof for the division into zones. The coating can be applied to ceilings, columns and curtain rods. When selecting the winning lighting options, a remarkable effect of playing colors on the surfaces of the walls is obtained.
As assistants it is worth inviting friends or family members, then the process of creating Venetian decoration will be not only creative, but also pleasant.