Than to grease loops?

Squeak of badly oiled doors, wickets, windowsirritates many people. And this is not surprising: so "much in this sound", that sometimes no nerves can withstand. What is the lubrication of the loops, and in what way is it best to do so that nasty creaking does not happen again after a while? Here are some practical tips on this topic.

Machine oil

If the farm has a bicycle, sewinga car or a car - for sure you know where you have at least some leftovers, droplets of engine oil. In the garage, in the closet, in the oilcan, long forgotten in the corridor on the shelf near the tools. It will be enough just a few drops of this magic product, and your loops will stop "singing" for a long time. This lubrication procedure can be carried out using a special grease dispenser. But if it is not near at hand, an ordinary medical syringe is also perfect. We type, direct to the joint, press. Done. The door no longer creaks. Of course, the best effect can be achieved by lifting the door so that the connectors are exposed. This will help to more deeply and thoroughly lubricate the loop.

Graphite grease

If it is not at hand, you can make yourself from the pencil lead of a simple and any oil, for example, sunflower.

Lithol or solidol

Good, but quite specific thick grease for all types of loops. Moreover, some mistresses do not know what they look like. In addition, they are mainly used for the lubrication of detachable loops.

VD - 40

Universal aerosol lubricant. It is intended for hard-to-reach, hidden surfaces and is ideal if your loops are attached and not removed. Aerosol penetrates everywhere, it will only be necessary to wait about ten minutes, and the creak will disappear.


If the lubricants listed above arehand is not available (and this happens quite often) to eliminate the creaking, at least temporarily, it is necessary to lubricate the loops with any kind of available oil: lean, melted, creamy. You can even pour a loop with liquid. The creak will immediately disappear, however, for a short time, until the surfaces dry out.

More on how to lubricate, read in the article Than lubricate the door.

Related news

Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops Than to grease loops